Designed for both mobile and stationary reservoir breather applications.
Provide fast-acting protection for hydraulic reservoirs against airborne moisture and particulate contamination
Moisture is prevented from entering and is actually “pumped” out with each flow cycle
Regenerates its water-holding capacity, which leads to longer service life – 3 to 4 times the life of conventional desiccant breathers
Electronic Indicator actuated by pressure differential, flashes red to indicate changeout is needed
Mechanical indicator kits: highly visible, bright red band shows when restriction limit is reached
Oil splash and mist containment keeps oil inside reservoir
Easy to install, simply hand tighten
Rugged, durable design
Robust housing protects media
Withstands high vibration, suitable for stationary and mobile applications
Filter out solid particulate down to 3 µm at 97% efficiency.
Prevent moisture from entering the reservoir.
Water-holding capacity is regenerated with every oil return phase for long service life.
Moisture removal: reversible adsorption.
Strips moisture vapor from intake air and expel the moisture back to the atmosphere.
Actuated by pressure differential, flashes red to indicate changeout is needed.
Indicator setting 1 psid/6.9 kPa.
Indicator power source: 3V lithium battery CR2032.
Mechanical Indicator Kits:
Install kit between reservoir and T.R.A.P. breather.
Lock-up style indicator with manual reset.
Highly visible, bright red band shows when restriction limit is reached.
Indicator setting, 20″ H2O/5.0 kPa.
Operating Temperature -40°F to 200°F / -40°C to 93°C.
Intermittent operation to 250°F / 121°C.
1″ and 3/4″ NPT, 3/4″ BSP Bayonet
1/4″ and 3/8″ NPT, 9/16″-18UN
45 cfm / 1274 lpm
25 cfm / 708 lpm
3 cfm / 85 lpm